Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Preparation
DIGITAL OUT
OPTICAL
COAXIAL
16 PREPARATION
TV
1
2
C
A
B
1
2
MODE
AUDIO OUT
1
1
VIDEO OUT
2
2
R
L
VIDEO
C
C
Y
S1
R
B
1
2
General notes
- Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the player.
Possible connections are shown in the following drawings.
Please refer to the manuals of your TV, VCR, Stereo System or
other devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR. The video
quality could be distorted by the copy protection system.
- For better sound reproduction, connect the player's audio out jacks to
the audio in jacks of your amplifier, receiver, stereo or A/V equipment. See
'Connecting to optional equipment'.
Caution: Do not connect the player's audio out jack to the phono
in jack of your audio system.
Connecting to a TV
Component Video (Y C
Connect the C
, C
, Y jacks on the DVD-player to the
R
B
corresponding jacks on the TV (cable not included) (A).
Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV (C).
S-Video (Y/C) connection
Connect the S-Video jack on the DVD-player to the S-Video in jack
on the TV using an optional S-Video cable (B).
Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV (C).
Video CVBS connection
Connect the Video out (CVBS) jack to the video in jack on the TV
using the audio/video cable supplied (C).
Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV.
C
) connection
R
B
Publicité
Chapitres
Table des Matières
