Endress+Hauser Soliwave FQR56 Manuel De Mise En Service page 2

1.
1.
1.
2.
2.
2.
3.
3.
3.
2
Soliwave FDR56/FQR56
Order code:
Ext. ord. cd.:
Order code:
Ser. no.:
Ser.-No.:
Ext. ord. cd.:
Order code:
Order code:
Ser. no.:
Ser. no.:
Ext. ord. cd.:
Ext. ord. cd.:
Serial number
www.endress.com/deviceviewer
Serial number
Serial number
www.endress.com/deviceviewer
www.endress.com/deviceviewer
XXXXX-XXXXXX
XXXXXXXXXXXX
XXX.XXXX.XX
XXXXX-XXXXXX
XXXXX-XXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXX.XXXX.XX
XXX.XXXX.XX
→
Technical Information
Soliwave FQR56/FDR56
Microwave Barrier
Technical Information
Soliwave FQR56/FDR56
Microwave Barrier
Technical Information
Soliwave FQR56/FDR56
Microwave Barrier
FQR56 emitter
FQR56 emitter
FDR56 transceiver
Application Your benefits
The Soliwave microwave barrier uses a contact-free FQR56 emitter • Flush-mounted installation, non-contact installation
procedure for detection. It can be installed in contai- possible
ners, conduits, shafts or on free fall shafts. It is possible
• Easy installation using R 1½ or 1½ NPT thread or
to take a measurement through non-metallic container FDR56 transceiver
suitable installation brackets
materials from the outside.
• Electronics housing can be rotated by 360°, allowing
Suitable as level limit switch for controlling and counting all
orientation into optimum position after installation
Application Your benefits
types of bulk solids or piece goods (such as bags or boxes).
The Soliwave microwave barrier uses a contact-free • Mechanical robustness • Flush-mounted installation, non-contact installation
Typical bulk solids include: procedure for detection. It can be installed in contai- - No wear possible
• Wood chips, wood dust or flour ners, conduits, shafts or on free fall shafts. It is possible
- Process-wetted ceramic sensor diaphragm (optional) • Easy installation using R 1½ or 1½ NPT thread or
• Plaster, cement, ash FDR56 transceiver
to take a measurement through non-metallic container - Long service life
suitable installation brackets
• Paper or cardboard shred
materials from the outside. - Maintenance-free
• Electronics housing can be rotated by 360°, allowing
• Gravel, sand
Suitable as level limit switch for controlling and counting all Application • Indication of the signal strength on the transceiver Your benefits
orientation into optimum position after installation
• Dried powders in general
types of bulk solids or piece goods (such as bags or boxes).
The Soliwave microwave barrier uses a contact-free • Flush-mounted installation, non-contact installation
• Adjustable sensitivity • Mechanical robustness
The FQR56 emitter and FDR56 transceiver are compact
procedure for detection. It can be installed in contai- possible
Typical bulk solids include: - No wear
transmitters with integrated power unit, and the transceiver • Direct connection of the supply voltage
ners, conduits, shafts or on free fall shafts. It is possible
• Wood chips, wood dust or flour • Easy installation using R 1½ or 1½ NPT thread or
(emitter and transceiver separately or together) - Process-wetted ceramic sensor diaphragm (optional)
has an additional integrated switching amplifier, which ena-
• Plaster, cement, ash to take a measurement through non-metallic container suitable installation brackets
- Long service life
bles easy electrical installation onsite. • Mechanically compatible to FQR50/FDR50 microwave
• Paper or cardboard shred materials from the outside.
- Maintenance-free
barrier, existing process connections can continue to be • Electronics housing can be rotated by 360°, allowing
The microwave barrier has an optional analog output
• Gravel, sand Suitable as level limit switch for controlling and counting all
• Indication of the signal strength on the transceiver orientation into optimum position after installation
(4 – 20 mA current output) for analysis of build-up, fouling used; likewise, accessories such as adapter flanges, instal-
• Dried powders in general types of bulk solids or piece goods (such as bags or boxes).
lation brackets and sight glasses can still be used. • Mechanical robustness
etc. This allows, for example, the progress of fouling to be • Adjustable sensitivity
The FQR56 emitter and FDR56 transceiver are compact Typical bulk solids include:
- No wear
evaluated from "uncontaminated" to "contaminated" (the • Conforms to ATEX, CSA and IECEx
transmitters with integrated power unit, and the transceiver • Direct connection of the supply voltage
• Wood chips, wood dust or flour
limits can be configured individually). - Process-wetted ceramic sensor diaphragm (optional)
(emitter and transceiver separately or together)
has an additional integrated switching amplifier, which ena- • Plaster, cement, ash
- Long service life
bles easy electrical installation onsite. • Paper or cardboard shred • Mechanically compatible to FQR50/FDR50 microwave
- Maintenance-free
barrier, existing process connections can continue to be
The microwave barrier has an optional analog output • Gravel, sand
• Indication of the signal strength on the transceiver
(4 – 20 mA current output) for analysis of build-up, fouling • Dried powders in general used; likewise, accessories such as adapter flanges, instal-
• Adjustable sensitivity
lation brackets and sight glasses can still be used.
etc. This allows, for example, the progress of fouling to be The FQR56 emitter and FDR56 transceiver are compact
evaluated from "uncontaminated" to "contaminated" (the transmitters with integrated power unit, and the transceiver • Conforms to ATEX, CSA and IECEx • Direct connection of the supply voltage
TI00443F/97/EN/16.16
limits can be configured individually). (emitter and transceiver separately or together)
71330435 has an additional integrated switching amplifier, which ena-
bles easy electrical installation onsite. • Mechanically compatible to FQR50/FDR50 microwave
barrier, existing process connections can continue to be
The microwave barrier has an optional analog output
(4 – 20 mA current output) for analysis of build-up, fouling used; likewise, accessories such as adapter flanges, instal-
lation brackets and sight glasses can still be used.
etc. This allows, for example, the progress of fouling to be
evaluated from "uncontaminated" to "contaminated" (the • Conforms to ATEX, CSA and IECEx
TI00443F/97/EN/16.16 limits can be configured individually).
71330435
TI00443F/97/EN/16.16
71330435
Soliwave FQR56/FDR56
Endress+Hauser Operations Ap
Endress+Hauser Operations Ap
Endress+Hauser Operations Ap
Endress + Hauser
RM
RM
RM
A0
A0
A0