Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Steam cooking
with pressure
has just
finished:
The timer
sounds
Soft cooking (phase 2) automatically
starts:
do not open the Nutricook until
the end of phase 2:
AUTOMATICALLY PROGRAMMED
SOFT COOKING TIME
take no action
Soft cooking ends:
The timer sounds
to show that the
recipe is finished.
To stop the timer from
beeping, press the
+ or - buttons once.
If the Smart Timer
flashes continuously
with rapid beeps
Replacing the batteries
• Battery service life depends on how often you use the
®
Smart Timer
. Nevertheless, if you see all or part of the
display disappear, you should replace the batteries.
• To help protect the environment, please remove worn
batteries. Do not dispose of batteries with household
refuse, but return them to your local collection centre.
Display
flashes
Turn
off heat
source.
IMPORTANT
Never remove
the Smart Timer
®
from its housing
during cooking.
ER ROR MESSAGE
®
- The Smart Timer
- A coking program has been
- When storing the lid upside do'wn, the lid does
not press on the + and - buttons.
0
MAXI
turn off
the heat
Countdown for
soft cooking
phase starts
automatically
Never force the Nutricook open, make
sure the pressure indicator is down in
the normal position.
Remember to remove
the Smart Timer
,
®
the control panel and
the seal when
cleaning the lid.
Make sure that:
is in place
®
on the NutriCook
®
selected
select the position
and hot steam escapes
from the steam outlet.
open my
NutriCook®
d
12
EN
FR
ES
Publicité
Table des Matières
