How To Prepare And Load Checks - Panini Vision X Mode D'emploi

4.2 How to Prepare and Load Checks

Preparing Documents for Processing
1. Remove all rubber bands, staples, paper clips, dog ears, etc. from the documents.
2. Jogging the documents is strongly recommended. In any case, align the bottom edges by repeatedly
tapping the bottom edge of the documents on a hard, flat surface.
3. Repeatedly tap the leading edge of the documents on a hard, flat surface.
4. Check bottom and leading edges once more to ensure documents are aligned.
Bottom Edge Leading Edge
Tip: Use a mechanical jogger device for faster and more accurate alignment of bottom and leading edges.
OPERATOR MANUAL Page 22 Getting Started