Klarstein Luna Mode D'emploi page 28

EN
28
Fix the Brackets:
• Drill holes at the marked points with a Ø 10 mm drill bit.
• Insert the Wall Plugs (1 1) into the holes.
• Fix the hood fixing bracket (20) with 3 screws (5 x 50) (10) supplied with the hood
at the horizontal line B.
• Fix a chimney fixing bracket (21) with 2 screws (5 x 50) (10) supplied with the
hood at the horizontal line D.
Fix Lower Decorative Chimney
• Fix the exhaust pipe on the hood body.
• Connect the chimney and the hood body with 2 screws (4.2 x 9.5) (12).
• Connect the chimney fixing bracket (21) and the chimney with 2 screws (4.2 x 9.5)
(12).
Hook the Hood Body
• Hook the hood body to the
hood fixing bracket (20).
• Level the hood body itself.
• Fix a chimney fixing bracket
(21) with 2 screws (5 x 50)
(10) at the horizontal line C to
prevent the hood body from
accidently sliding off the hood
fixing bracket.
12
21
D
21
C
2 screws
(ST5*50)