Technaxx TX-29 Manuel D'utilisation page 72

Step 5: Now you entered the device edit page. Scan the QR-code of the TX-29/TX-30 or
enter the Device ID (= Cloud ID). Switch to your TX-29/TX-30 press right click and open
"Fast network". There you find device IP and QR-code. See chapter 5.3 system setup 
network setup.
In the APP under Description enter your customized name for the device.
Input video recorder login information (username and password).
Step 6.1/6.2: Pay attention to select the correct channel number (TX-29 = 4; TX-30 = 8).
Step 7: Press submit to finish and save the setting (maybe the device will show message
"Error - The device has been existed – Confirm"), than your device is successfully added.
Step 8: Click on the device in the device list to get live video
Step 9: Left circle shows you the single screen; Right circle shows you four split screen.
Step 10: (Meaningful for TX-30) Left circle shows you the four split screen; Right circle
shows you eight split screen.
Note: With Capture you can manually take snapshots, with record manually take videos
and with stream you can change between Main (HD) and Sub (SD) stream.
Add group
Step 1: Click on Group. Then click on "+" icon to add channels to a group.
Step 2: Enter the group name.
Step 3: Select different channels for the group.
Step 4: Click on submit to save.
26