Thermozone AD300A/E, AD400A/E
Accessories
CB30N, Control box
Three-stage control of air flow. Delivered in
separate box for wall mounting. CB 30 controls
units without heat (AD310A, AD315A, AD320A,
AD410A, AD415A, AD420A). Can control 3-6 units.
Max input 10A. Protection class: splash-proof
design (IP44).
2221AG, Variable fan speed regulator
Single-phase thyristor for variable fan speed
control and for switching off and on. Designed for
surface mounting. Fits in rectangular mounting
case. The regulator controls a maximum of 2-3
units. Max input 5A. 2221AG regulates units
without heat (AD310A, AD315A, AD320A, AD410A,
AD415A, AD420A). Protection class: splash-proof
design (IP44).
FRE6, Digital variable fan speed regulator
FRE6 has two different regulations to control the
air curtain. The UT-regulation that is controlled by
the door contact, room thermostat and the outdoor
temperature- and the IT-regulation that is
controlled by the door operation. Regulates a
maximum of 1-3 units. Max input 6A. With a
supply current above 6A a slave unit must be used.
It regulates electrically heated units . Protection
class: jet-proof (IP54)
AGB304, Position limit switch
Starts the air curtain or activates a fan speed
regulator when the door opens. When the door
closes, it shuts the air curtain off or signals to the
regulator.
CB32N, Control panel
Wall mounted manual three step regulation of the
fan speed and two step regulation of the output.
Controls a maximum of 6 units (max. current 10A).
Protection class: IP44
RTI2, Electronic 2-stage thermostat
Regulates the heat. Adjustable temperature
difference between the stages (1-10°C). Setting
range 5–35°C. For electrically heated units.
Protection class: splash-proof design (IP44).
KRT2800, 2-stage themostat
Regulates the heat. Adjustable temperature
difference between the stages (1– 4). setting
range 0-40°C. For electrically heated units.
Protection class: jet-proof design (IP55).
KRT1900, Capillary tube thermostat
Opens/closes water valves and starts/stops
fans. A thermostat with change-over relay for
control of heat and fans. For hot water heated
units . Protection class: jet-proof design
(IP55).
AGB2S, Position limit switch
Starts the air curtain or activates a fan speed
regulator when the door opens. When the door
closes, it shuts the air curtain off or signals to the
regulator.
GB
2 5