Step 2 Insert The Card Into An Available Pci Slot On Your Desktop - Belkin F5D7001uk Manuel De L'utilisateur

Installing and Setting up the Card
Step 2 Insert the Card into an Available PCI Slot on your Desktop
2.1
Shut down your computer and disconnect your power cord.
2.2
Remove the screws behind your computer case that secure the
computer cover and remove cover.
Note: Touch any metal part of the case to discharge static
electricity to avoid damage to the product or your computer.
2.3
Locate an empty PCI expansion slot. It is usually white in color.
Confirm that the Card will fit into the slot you have chosen. Keep
in mind that the included antenna needs to be oriented with the
top pointing up. If there are cables and other connectors in the
way, try to pick the PCI slot that has the fewest obstructions to
the correct positioning of the antenna.
2.4
Remove the metal port cover from the back of the computer that
corresponds to the PCI slot you selected. If there is a screw,
place it in a safe place, as you will be using it to attach the Card
to the computer later.
1.4
Installation will now start. Choose
an installation location. Click
"Next" to accept the default
location or click "Browse" to select
a different location, and then
click "Next".
1.5
The wizard will prompt you to shut
down your computer and insert the
Card into the PCI slot.
2.5
Push the Card firmly into the PCI
slot that you have chosen. Apply
pressure as needed until the
connector is fully seated.
9 9
1
2
3
4
5
6