Télécharger Imprimer la page

Hilti AG 500-11S Mode D'emploi Original page 7

Publicité

Les langues disponibles

Les langues disponibles

1
Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use.
prerequisite for safe, trouble-free handling and use of the product.
• Observe the safety instructions and warnings in this documentation and
on the product.
• Always keep the operating instructions with the product and make sure
that the operating instructions are with the product when it is given to
other persons.
1.2 Explanation of symbols
1.2.1 Warnings
Warnings alert you to hazards that can occur when you are handling or
using the product. The following signal words are used in combination with
a symbol:
DANGER! Draws attention to imminent danger leading to serious
injury or fatality.
WARNING! Draws attention to a potential threat of danger that can
lead to serious injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that
can lead to minor injury or damage to the equipment or other prop-
erty
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions
The numbering reflects the sequence of operations shown in the
illustrations and may deviate from the steps described in the text
Item reference numbers are used in the overview illustrations and
refer to the numbers used in the product overview section
*2141935*
Printed: 19.10.2018 | Doc-Nr: PUB / 5402266 / 000 / 01
2141935
This is a
English
1

Publicité

loading