Publicité
Les langues disponibles
Les langues disponibles
3.7 Restart interlock
The product does not restart by itself when the on/off switch is locked in the
ON position and power is restored after an interruption in the electric supply.
The on/off switch must first be released and then pressed again.
3.8 Temperature-dependent product protection
The temperature-dependent motor protection system monitors current input
and motor temperature and thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure,
the product's performance drops noticeably or it might stall completely.
A standstill should be avoided. No specific value can be given for the
permissible overloading limit for the power tool as it depends on motor
temperature.
3.9 Front cover for the disc guard
When grinding with straight grinding discs and cutting with cutting discs
in metalworking applications, use the standard guard with front cover.
3.10 DG-EX 125/5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup
wheels for grinding mineral materials.
CAUTION Use of this hood for working on metal is prohibited.
3.11 DC-EX 125/5"M dust hood for grinding (accessory)
The power tool may be used for cutting and slitting work on mineral materials
only when fitted with a dust hood.
CAUTION Use of this hood for working on metal is prohibited.
3.12 DC-EX 125/5"C dust hood for cutting (accessory)
Use the DC-EX 125/5"C dust hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
4
Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum diam-
eter of Ø 5" and a maximum disc thickness of 1/4" (grinding discs) or 1/8"
(cutting discs) which are approved for use at a rotational speed of at least
11,500/min and a peripheral speed of 80 m/s may be used.
WARNING! When cutting or slitting with cutting discs, always use the
standard guard with additional cover plate.
*2141935*
Printed: 19.10.2018 | Doc-Nr: PUB / 5402266 / 000 / 01
2
2141935
3
4
5
English
11
Publicité
