Bosch BLAZE GLM 42 Consignes De Sécurité/D'utilisation page 18

–35º
26'01" ⅓
Length Measurement
For length measurement, press the function button
7 [Func] and use the plus button 3 [ ] or minus but-
ton 8 [ ] to cycle through the measurement functions
until the highlighted square appears over the indicator
for length measurement
appears in the status bar. Select length measurement
by pressing the measure button 2 [ ]. Activate the la-
ser by pressing the measure button 2 [ ]. The laser
will be switched on. Aim the laser at the object you
want to measure the distance to. Press the measure
button 2 [ ] again to take the measurement. The mea-
surement will be shown in the result line d.
0.0º
of the measured-value lines c will move to the middle
line of the measured-value lines c and the measure-
ment from the result line d will move to the bottom
line of the measured-value lines c.
Press the measure button 2 [ ] for a new measure-
ment which will display on the result line d.
2610051599 03-18 GLM42.indd 18
Watch the numbers move in real time
in result line d as you move the laser
measure towards or away from the ob-
ject you are aiming at.
Press the measure button 2 [ ] to
hold the measurement.
Press the measure button 2 [ ] to re-
activate real time measuring.
Press the measure button 2 [ ] and
the previous measurement will move
to the bottom line of the measured-
4'02" ⁄
value lines c.
8'05"
Press the measure button 2 [ ] for a
12'07" ⁄
new measurement which will display
16'11" ⅜
on the result line d.
Press the measure button 2 [ ] and
the measurement from the bottom line
and the word "Length"
-18-
3/23/18 9:52 AM