Storing; Cleaning; Maintenance - Stihl HLA 56 Notice D'emploi

14 Storing

For transport regulations see www.stihl.com/
safety-data-sheets
14 Storing
14.1 Storing the Hedge Trimmer
► Switch off the hedge trimmer and remove the
battery.
► Fit the blade scabbard so that it completely
covers the cutting blades.
► Observe the following points when storing the
hedge trimmer:
– Hedge trimmer is out of the reach of chil‐
dren.
– Hedge trimmer is clean and dry.
14.2 Storing the Battery
STIHL recommends that you store the battery
with a charge between 40% and 60% (2 LEDs
glow green).
► Observe the following points when storing the
battery:
– Battery is out of the reach of children.
– Battery is clean and dry.
– Battery is in an enclosed location.
– Battery is stored separately from the hedge
trimmer and charger.
– Battery is in non-conductive packaging.
– Battery is in a temperature range between
-10°C and +50°C.
14.3 Storing Hedge Trimmer on a
Wall Bracket
The hedge trimmer can be stored on the wall
bracket.
Mounting the wall bracket
a
b
► Check the following points when mounting the
wall bracket on a wall:
– Suitable fixing materials.
– Wall bracket is horizontal.
The following dimensions are observed:
– a = at least 20 cm
– b = at least 130 cm
– c = 22.8 cm
0458-816-9621-C
c
Fitting hedge trimmer on the wall bracket
► Switch off the hedge trimmer and remove the
battery.
► Fit the blade scabbard so that it completely
covers the cutting blades.
► Disassemble the hedge trimmer.
► Hang up the shaft with the coupling sleeve.
► Hang up the cutter bar with the swivel handle.

15 Cleaning

15.1 Cleaning the long-reach hedge
trimmer
► Switch off the long-reach hedge trimmer and
remove the battery.
► Clean the long-reach hedge trimmer with a
damp cloth or STIHL resin solvent.
► Clean vents with a paintbrush.
► Remove foreign objects from the battery com‐
partment and clean the battery compartment
with a damp cloth.
► Clean the electrical contacts in the battery
compartment with a paintbrush or soft brush.
15.2 Cleaning the Cutting Blades
► Switch off the hedge trimmer and remove the
battery.
► Spray both sides of blades with STIHL resin
solvent.
► Fit the battery.
► Switch on the hedge trimmer for 5 seconds.
The cutting blades run. STIHL resin solvent is
distributed evenly.
15.3 Cleaning the Battery
► Clean the battery with a damp cloth.

16 Maintenance

16.1 Sharpening the Cutting Blades
STIHL recommends you have the cutting blades
resharpened by a STIHL servicing dealer.
WARNING
■ The teeth of the cutting blades are very sharp.
There is a risk of cut injuries.
► Wear work gloves made of durable mate‐
rial.
► Switch off the hedge trimmer and remove the
battery.
English
33