Publicité
Les langues disponibles
Les langues disponibles
The Plug & Play function incorporated in
the operating system is supported by the
optional enclosed "Installation Disk". To
install the driver, follow the instructions
displayed on the screen on booting.
The product is listed by Microsoft in the
Windows Hardware Compatibility List
(WHQL) as "Smart Card Keyboard".
4. How to use the
integrated smartcard
terminal
4.1 Inserting the smartcard
Symbols on the keyboard housing show
you which way round to hold the smart-
card when inserting it into the reader:
– Vertical card reader:
Insert the smartcard with the chip at
the bottom, facing the user.
To ensure that the smartcard slots into
the proper position for scanning,
the user
must push the card past an action point,
involving some initial resistance.
4.2 Inserting the plug-in cards
In addition to conventional card formats,
payment transaction and security
systems also use smaller cards that are
usually left in place for lengthy periods of
time. Usually known as plug-in cards,
they can be slotted into the underside of
the keyboard.
12
All manuals and user guides at all-guides.com
Careful!
Voltage spikes in the plug-in socket can
destroy plug-in cards, causing all data to
be lost.
– Please refer to the relevant software
– Make sure you insert the card the right
5. Firmware
he keyboard is supplied with standard
firmware for processing all card reader
and keyboard functions. This firmware
can be customized to your needs by
agreement with Cherry GmbH.
6. Status indicators
Whenever the PC is switched on or
rebooted, the keyboard peforms a self-
Always switch off the PC before
inserting or swapping a plug-in card
Fold out the diagram in the front of the
user manual
Turn the keyboard over (cable duct
uppermost; cf. diagram)
Gently push down the fin on the cover
and open the cover.
Open the plug-in housing
do so, push the locking device
upwards in the direction of the arrow
and carefully open the lid.
If the plug-in card was delivered in a
carrier card, remove the plug-in card
from its carrier card.
documentation for instructions on how
to assign plug-in cards to the appropriate
plug-in housing!
way up! Plug in cards should be inserted
straight edge first and with the chip
uppermost (cf.
).
inside. To
Publicité
Chapitres
