G 81-12000Ltb; G 81-12000Ltc; Software; Smartcard Reader Installation Instructions - Cherry Fingerprint G81-12000 Manuel D'utilisation

Plug in the Cherry keyboard
Insert the 9-pin SUB-D connector
the smartcard reader into one of your
computer's COM ports (serial port)
Insert the 25-pin SUB-D connector
into your computer's printer port
(parallel port)
If your computer's keyboard interface
does not supply enough power to run
the keyboard, plug in the external
power supply
Switch the computer on again.
When the computer is switched on, both
computer and keyboard perform a self-
diagnostic test. Once the self-test is
complete and the operating system has
been loaded, you can start to work with
the keyboard. Please check that the
keyboard is functioning correctly. If an
error message appears when you switch
on your computer, or if scrambled
characters appear on-screen, please
make sure that the keyboard is properly
connected to the computer and that all
other connections are firmly in place.

3.2 Software

The keyboard supports a variety of
software applications. Please read the
relevant user instructions for each
software application. More information
on the standard software supplied by
Cherry is available from the Cherry
website at: http://www.cherry.de.
3.3 Smartcard reader installation
instructions

3.3.1 G 81-12000LTB...

Kindly install the latest drivers from the
Gemplus Homepage:
Visit the following internet page:
http://www.gemplus.com/
products/hardware/drivers.htm
All manuals and user guides at all-guides.com
for
3.3.2 G 81-12000LTC.../LVD...
The integrated smartcard terminal was
developed in compliance with the PC/SC
(Personal Computer Smart Card
Workgroup – http://www.pcscworkgroup.
com) specification, meaning that it is
ideal for developers who want to produce
smartcard-based PC applications. Using
the appropriate driver or IFD (Interface
Device) handler, the card terminal can be
integrated with the PC's operating system.
You will find the associated drivers for
the different operating systems either on
the data carrier included with the prod-
uct, or the latest versions on our web
site in the Internet at:
http://support.cherry.de
Register on Gemplus Developer's Site.
You will find on the Driver Download
Page the table „PC/SC Drivers" and
the file „PC SC_Reader_install.exe"
Execute the installation for the reader
GCR 410.
11