Operating Manual; Adjusting The Volume - Cherry MX BOARD 1.0 BACKLIGHT Mode D'emploi

OPERATING MANUAL

CHERRY MX BOARD 1.0 BACKLIGHT – Corded Mechanical Keyboard
Before you begin ...
Every device is different!
The operating instructions contain
information on effective and
reliable use.
• Read the operating instructions carefully.
• Keep the operating instructions and pass
them on to other users.
The CHERRY MX BOARD 1.0 BACKLIGHT is a
keyboard for operating PCs and laptops.
It is characterized by the following features:
• Precise response of the
legendary CHERRY MX key
modules, which you can still feel
after 50 million key strokes. The
modules are entirely developed and
manufactured in Germany.
• Win-Key lock: Windows buttons can be
disabled to prevent inadvertent operation
• Full N-Key Rollover: Simultaneous operation
of all keys without any key ghosting effects
• Additional feet for non-slip grip and custom
height adjustment in 3 stages
• Dimmable, white key backlighting
• USB plug with white, glowing
For information on additional products,
downloads, and much more, please visit
www.cherry.de.
1 Connecting the
keyboard
• Connect the keyboard to the USB port of the
PC/laptop.
The keyboard is ready to use without installing
any software. Regularly check that the
software is up to date (see 9.3 "Updating the
firmware").
2 Attaching the palm rest
1 Slide the palm rest close to the keyboard.
2 Align the palm rest with the center of the
keyboard.
3 Applying slight pressure, move the latching
hooks of the palm rest into the openings
provided on the keyboard.
The palm rest latches into the keyboard
housing with a click.
3 Adjusting the angle of
the keyboard
You can adjust the angle of the keyboard in
3 stages.
logo
Position 1 (closed foldable feet):
Position 2 (plugged rubber feet):
Position 3 (deployed foldable feet):

4 Adjusting the volume

The symbols for adjusting the volume are
secondary functions of F1 to F3.
• To adjust the volume, press the FN key and
the appropriate key as shown in the table.
Example:
To switch the sound on or off, press the FN
key and F1 ( ).
EN
9