hydro
Safety rules
• Do not stand in the movement area of the gate.
• Do not let children play with controls and near the gate.
• Should operating faults occur, do not attempt to repair
the fault but call a qualified technician.
Manual and emergency gate operation
If there is a power failure or malfunction the wings can be
moved by hand as follows:
Models with hydraulic lock
(i.e. hd.35 c -hd.35 ac- hd.50 ac):
• Use the special key supplied with the operator to open
the protective cover of the release mechanisms (Fig.1).
• Turn the knob anticlockwise to disengage the automation.
(Fig.2)
• The wing can now be opened and closed manually.
• To engage the automation turn the knob anticlockwise.
• Lock the cover shut.
Models without hydraulic lock
(i.e. hd.35 - hd.45 - hd.50):
Since these models are reversible, simply open the electric
lock and the wing can be moved manually.
Slowly push the wing by its outer end, accompanying it
all the way to the gate stop. The movement may be made
easier by slackening the release knob.
Open the protective cover to access the release knob
user's handbook
• Every month check the good operation of the emergency
manual release.
• It is mandatory not to carry out extraordinary maintenance
or repairs as accidents may be caused.
These operations must be carried out by qualified person-
nel only.
• Periodically check safety components and any other parts
of the system that may become hazardous if worn.
If the product must be dismantled, it must be disposed ac-
cording to regulations in force regarding the differentiated
waste disposal and the recycling of components (metals,
plastics, electric cables, etc..). For this operation it is advis-
able to call your installer or a specialised company.
All CAB products are covered by insurance policy for any
possible damages to objects and persons caused by con-
struction faults under condition that the entire system be
marked CE and only CAB parts be used.
1: Turn anticlockwise to disengage the operator and
move the wing manually
2: Turn clockwise to engage the operator
Maintenance
Waste disposal
Warning
1
2