Dell Latitude XT2 Mode D'emploi page 7

CAUTION:
When you disconnect the Dell AC adapter cable from the Tablet-PC or
media base, hold the connector, not the cable itself, and pull firmly but gently to
avoid damaging the cable. When you wrap the AC adapter cable, ensure that you
follow the angle of the connector on the AC adapter to avoid damaging the cable.
CAUTION:
Use the Latitude™ XT2 media base with your Latitude XT2 only. If you
use a media base from earlier models of Dell computers you may damage the
media base or the Tablet-PC.
Before Docking Your Tablet-PC
1 Save and close any open files, and exit any open programs.
2 Connect the AC adapter to the AC adapter connector on the media base
and to an electrical outlet.
3 Before you dock your Tablet-PC to the media base for the first time,
the Tablet-PC operating system must have completed its setup process:
Ensure that the Tablet-PC is not connected (docked) to the media
a
base or to the battery slice.
Turn on the Tablet-PC.
b
Verify that the Microsoft
c
Shut down the Tablet-PC.
d
® ®
Windows desktop appears.
Media Base
5