Comelit FT/SB/11 Manuel Technique page 6

PARAMETER POSSIBLE VALUE
RS485 ADDRESS Value from 01
to 255.
AUDIO TIME Value from 10 to
180. Expresses
the duration in
seconds of the
door-entry phone
conversation.
LOCK-RELEASE Value from 01 to
TIME
99. Expresses
the duration
in seconds of
lock-release relay
closure.
RESET TIME Value from 01 to
10. Expresses
the wait time in
seconds before
sending the reset
code at the end of
a door-entry phone
conversation.
6
DEFAULT VALUE
0
4B-4) Call mode
SIMPLEBUS - STANDARD call mode (default)
180
In this operating mode, the door-entry phone user is identified by a User
Name field and a Code field no longer than 3 digits (between 1 and 240).
EXAMPLE: User name= Smith; Code= 1.
SIMPLEBUS TOP call mode
In this call mode, the door-entry phone user is identified by the User name
field and a Code field consisting of 2 parts, a zone field with up to 3 digits
(between 1 and 500) and a user field which must have 3 digits (between
01
1 and 240).
EXAMPLE: User name= Smith; Code= 25 015.
Access carried out
10
at the configuration
stage (see point 4A)
TASK
select the SETTINGS
/ SYST. PAR. / CALL
MODE menu
using the key
INITIAL CONDITION
The module
MAIN
programming mode.
SETTINGS
The
scrolled
automatically every
2 seconds.
DISPLAY DESCRIPTION
N.B. The
in brackets
CALL MODE (0-3)*
the min. and max.
VALUE:_
parameter
(ref. table, page 5).
is in
menus are
through
values
are
limits