Comelit FT/SB/11 Manuel Technique page 5

CORRIGENDA
Page 10
Introduction
The Comelit digital call module Art. 3072/A can be used in Simplebus type
systems and is fitted with a name directory to store a list of user names,
in order to call the door-entry phone users by entering the code which
identifies them.
The main characteristics are as follows:
• Memory capacity: 1500 names of 16 alphanumerical characters.
• 32-character alphanumeric display.
• Can be combined with porter modules 3062, 3262 (combined with module
1602) and 3268 (combined with module 4660).
• Option of changing lock-release time, audio time and reset wait time on
the porter module.
• 2 call management modes (see "4B-4) Call mode", page 6):
Simplebus call mode - standard (default), Simplebus Top call mode.
• Entering the name list (Download) by means of programmer Art. 1230
or by means of connection with a PC equipped with software Art. 1249B.
• Entering the names by means of connection with the PC can be done
over an RS232 line or over an RS485 line by means of the interface card
Art. SK9073 (see system diagram page 24).
• Reading (Upload) of the name list stored in the directory module by means
of connection with a PC equipped with software Art. 1249B.
• Option of displaying graphics interface messages in one of 12 available
languages (Italian, English, French, German, Portuguese, Danish, Finnish,
Dutch, Spanish, Swedish, Polish and Norwegian).
Page 9
6) Parameters table
The table below shows the configuration parameters for module Art. 3072/A:
PARAMETER POSSIBLE VALUE
LANGUAGE 1=ITALIAN
2=ENGLISH
3=FRENCH
4=GERMAN
5=PORTUGUESE
6=DANISH
7=FINNISH
8=DUTCH
9=SPANISH
10=DEFAULT
11=SWEDISH
12=POLISH
13=NORWEGIAN
TYPE OF 0= connection via
DOWNLOAD
RS232 line
1= connection via
RS485 line
CALL MODE 0=STANDARD
1=TOP STANDARD
DEFAULT VALUE
10=DEFAULT
0= connection via
RS232 line
0=STANDARD
5