- High temperature or high pressure steam disinfection to the oximeter is not
permitted. Refer to User's Manual for instructions of cleaning and disinfection.
- DO NOT have the oximeter immerged in liquid. When it needs cleaning, please
wipe its surface with disinfect solution by soft material. Do not spray any liquid
on the device directly.
- When cleaning the device with water, the temperature of water should be lower
than 60°C.
2. Overview
The pulse oxygen saturation is the percentage of HbO
the O
concentration in the blood. It is an important bio-parameter to the respiration. Many
2
of the respiration disease will cause hypoxemia, even endanger the patient's health. As a
result, monitoring the SpO
to measure SpO
is to analyze the sample of the patient's blood, so can get the partial
2
pressure of oxygen and calculate the SpO
inconvenient and can not be used to monitor continuously. For the purpose of measuring the
more easily and accurately, GIMA developed the Fingertip Oximeter. The device can
SpO
2
measure the pulse rate simultaneously.
The Fingertip Oximeter is compact, convenient to use and carry and with low power
consumption. You just need to put the fingertip into the sensor of the device, the SpO
will appear on the screen immediately.
2.1 Features
- Accurately measure SpO2 value and pulse rate value;
- Perfusion index display is available;
- Automatic start measuring after putting finger into rubber cushion;
- Power off automatically without signal for more than 8 seconds;
- Audible & visible alarm function;
- Low voltage indication;
2.2 Major Applications and Scope
The Fingertip Oximeter can detect SpO
the pulse intensity by the bar-display. This device is applicable to home, hospital (including
internal medicine, surgery, anesthesia, pediatrics, emergency room etc.), oxygen bar, the
community medical center, alpine area and it also can be used before or after sports, and the
like.
This device is not appropriate to be used for continuous monitoring.
ENGLISH
is indispensable in the clinical rescuing. The traditional method
2
and pulse rate through patient's finger, and indicate
2
in the total Hb of the blood, so-called
2
by use the blood-gas analyzer. This method is
2
12
value
2