Drive Roll And Wire Guides Table - Lincoln Electric POWER MIG 140 Manuel De L'opérateur

B-4
Wire Diameter &
Type
.025"(0.6mm) MIG wire .025"/.030" (0.6mm/0.8mm)
.030"(0.8mm) MIG wire
.035"(0.9mm) MIG wire .035"(0.9mm) Smooth Drive Roll
.030"(0.8mm) flux-cored .030"/.045" (0.8mm/1.1mm)
.035"(0.9mm) flux-cored
.045"(1.1mm) flux-cored .030"/.045" (0.8mm/1.1mm)
(See Figure B.6)
12. CIRCUIT BREAKER – If the rated input current of
the machine is exceeded this circuit breaker will
trip. Press to reset.
13. GAS INLET – Shielding gas connects to this inlet.
OPERATION
TABLE B.1
DRIVE ROLL AND WIRE GUIDES
Drive Roll
Smooth Drive Roll
Knurled Drive Roll
Knurled Drive Roll
POWER MIG® (140, 180 MODELS)
Drive Roll Part Inner Wire Guide
Number
KP2529-1
.025"-.035"
KP2529-2 (0.6mm-0.9mm)
Steel Wire Guide
KP2529-3
.045"(1.1mm) Steel
KP2529-3
Wire Guide
FIGURE B.6
13
12
B-4
Inner Wire Guide
Part Number
KP2531-1
KP2531-2