Identify And Locate Components For 140 Amp And 180 Amp Units - Lincoln Electric POWER MIG 140 Manuel De L'opérateur

A-3
IDENTIFY AND LOCATE COMPONENTS
• Wire Feeder Welder.
• Work Cable & Clamp.
• Magnum Pro 100L Welding Gun.
• 3 .035"(0.9mm) Contact Tips
(1 installed on the welding gun).
• 3 .025"(0.6mm) Contact Tips.
.025
.035 .035 .025
• Spool of .035"(0.9mm) diameter
NR-211MP Innershield Flux-cored
Wire.
• Spool of .025"(0,6mm) diameter
L-56 MIG Wire.
INSTALLATION
INCLUDED COMPONENTS
.025
POWER MIG® (140, 180 MODELS)
for 140 AMP and 180 AMP UNITS
• .025"-.030" (0.6 - 0.8mm)
Smooth Drive Roll
• .030" -.045" (0.8 - 1.1mm) Knurled Drive Roll
(Installed on Machine)
• .025" -.035" (0.6 - 0.9mm) Inner Wire guide
• .035" -.045" (0.9 - 1.1mm) Inner Wire Guide
(Installed on Machine)
• Outer Wire Guide
(Installed on Machine)
INNER WIRE GUIDE
INNER WIRE GUIDE
.025-.035 (.6-.9mm)
.035-.045 (.9-1.1mm)
• Black Flux-cored Gasless Gun Nozzle
• Copper MIG Gas Gun Nozzle
(Installed on Welding Gun)
• 2" Spindle Adapter (For 8" Reel of wire)
• Regulator • Gas Hose
• Learn to Weld (LTW1 Manual)
• DVD
REGULATOR
A-3
• .035" (0.9mm)
Smooth Drive Roll
OUTER WIRE GUIDE
2" SPINDLE ADAPTER (FOR 8" REEL OF WIRE)
GAS HOSE
LTW1
"LEARN TO WELD"
DVD