3M PELTOR WorkTunes Pro Mode D'emploi page 9

Australia/New Zealand Standard AS/NZS 1270:2002
Compatible Industrial Safety Helmets
earmuffs were tested in combination with the following industrial safety helmets, and may give different levels of
protection if fitted to different helmets.
Explanation of the industrial safety helmet attachment table:
COMPONENTS
FITTING INSTRUCTIONS
Headband
positioned across the top of your head.
Helmet Attachment
unit from ventilation mode to work mode, press the headband wires inwards until you hear a click on both sides.
Make sure that the cups and the headband wires do not press on the edge of the helmet when in work mode as this
ventilation.
OPERATING INSTRUCTIONS
Switching the headset on and off
Adjust radio volume
mute to enable listening to the external input.
Search station
you exit the search station mode.
7