3M PELTOR WorkTunes Pro Mode D'emploi page 8

interference, which can be determined by turning the device off and on, the user is encouraged to try to correct the
Reorient or relocate the receiving antenna.
Increase the separation distance between the two interfering devices.
Consult 3M Technical Support.
WARRANTY AND LIMITATION OF LIABILITY
Note: The following statements do not apply in Australia and New Zealand. Consumers should rely on their
statutory rights.
upon timely notification of the issue by you and substantiation that the product has been stored, maintained and
damage to the product caused by accident, neglect, or misuse.
Commission rules permitting the operation of this device.
LABORATORY ATTENUATION
Explanation of attenuation tables:
European Standard EN 352
USA Standard ANSI S3.19-1974
The level of noise entering a person's ear, when hearing protector is worn as directed, is closely approximated by
Example
level should be used.
6