DeWalt DW682 Traduction De La Notice D'instructions Originale page 33

• Only sharp blades in perfect working order
should be used; cracked or bent blades should
be discarded and replaced at once.
• Ensure that the blade is securely fixed and
rotates in the correct direction.
• Kickback occurs when the tool begins to stall
rapidly and is driven back towards the operator.
Release the switch immediately if the blade
sticks or the tool stalls.
• Keep the blades sharp.
• Support large panels near the cutting area.
• Do not remove the tool from the workpiece
while making a cut with the blade rotating.
Release the on/off switch and wait for the blade
to come to a halt.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of injury when changing the disc.
– Risk of dust inhalation from materials that when
cut, can be harmful.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Blade diameter.
DATE CODE POSITION (FIG. 1)
The Date Code (q), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Biscuit jointer
1 Dust bag
2 Dust adapters
1 Pin spanner
1 Hex screwdriver
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/Off switch
b. Lock-on button
c. Top handle
d. Fence height adjuster
e. Dust extraction outlet
f. Adjustable fence
g. Anti-slipping pins
h. Plunge depth adjusting knob
i. Locking knob
j. Spindle lock
k. Star knob
INTENDED USE
Your biscut jointer has been designed for making flat
dowel joints in wood and wood products.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
The biscut jointer is a professional power tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
EN G LI SH
31