Amazon Alexa - Kenwood KDC-BT665U Mode D'emploi

AMAZON ALEXA

Alexa is the cloud-based voice service developed by Amazon. You can ask
Alexa to play music, get weather reports, traffic information, control smart
home devices, shop on Amazon, search the internet, set reminders and
more.
Preparation:
• Create an account at <www.amazon.com>.
• Install the latest version of the Alexa mobile application on your device
(iPhone/iPod touch or Android device), then log in to the application.
• Be sure to enable the internet connection on your smartphone.
Setup for the first time
For Android device
1
Pair your device with this unit via Bluetooth. (Page 13)
2
Start up the Alexa mobile application on your device.
3
Pair this unit to Alexa mobile application.
Perform Option A or Option B.
For iPhone/iPod touch
1
Pair your device with this unit via Bluetooth. (Page 13)
2
Start up the Alexa mobile application on your device.
3
Press on the unit to enter ALEXA source.
• You may also press B SRC repeatedly to select iPod BT source.
• See "Set the playable source for iPod/iPhone" on page 9 for further
information.
4
Pair this unit to Alexa mobile application.
Perform Option A or Option B.
Option A: Direct Link
Access the following URL or scan the QR code with your smartphone:
https://www.kenwood.com/car/alexa
Option B: Manual Pairing
1
Start up the Alexa mobile application and go to the "Devices" tab.
2
Tap the " + " icon at the top right corner.
3
Tap "Add Device".
4
Tap "Automotive Accessory" or "Headphones" from the list of device
types.
5
Tap the name of your receiver ("KDC-BT665U") and follow the
instructions.
Once the setup process is completed, the Alexa mobile application will
establish a connection with this unit.
• The Alexa connection can be disconnected if:
– A2DP profile is disconnected
– Bluetooth is disconnected
– This unit is turned off
– Stop Alexa mobile application running in foreground/background of
your device
– Any other conditions depending on the connected device
To establish Alexa connection again, reconnect the A2DP profile.
• Alexa connection cannot be established again if you:
– Reinstall Alexa mobile application
– Delete the paired device and perform pairing again (for Android device)
To establish Alexa connection again, perform the setup process again.
• You can check the Alexa connection from the Alexa mobile application.
If the name of this unit appears on the screen of "ALL DEVICES", you do not
need to perform setup process again.
19
ENGLISH