Amazon Alexa - Kenwood KMM-BT356 Mode D'emploi

Bluetooth®
To
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
* Depending on the connected device, some devices may not support this feature.
Operations and display indications may differ according to their availability
on the connected device.
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 9)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPod BT source, the source automatically changes to iPod USB source. Press
B SRC to select iPod BT source if the device is still connected via Bluetooth.
On the faceplate
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*,
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM]*.
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 11.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)

AMAZON ALEXA

Alexa is the cloud-based voice service developed by Amazon. You can ask
Alexa to play music, get weather reports, traffic information, control smart
home devices, shop on Amazon, search the internet, set reminders and more.
Preparation:
• Create an account at <www.amazon.com>.
• Install the latest version of the Alexa mobile application on your device
(iPhone/iPod touch or Android device), then log in to the application.
• Be sure to enable the internet connection on your smartphone.
Setup for the first time
For Android device
1
Pair your device with this unit via Bluetooth. (Page 16)
2
Start up the Alexa mobile application on your device.
3
Pair this unit to Alexa mobile application.
Perform Option A or Option B.
For iPhone/iPod touch
1
Pair your device with this unit via Bluetooth. (Page 16)
2
Start up the Alexa mobile application on your device.
3
Press on the unit to enter ALEXA source.
• You may also press B SRC repeatedly to select iPod BT source.
4 Pair this unit to Alexa mobile application.
Perform Option A or Option B.
Option A: Direct Link
Access the following URL or scan the QR code with your smartphone:
https://www.kenwood.com/car/alexa
Option B: Manual Pairing
1
Start up the Alexa mobile application and go to the "Devices" tab.
2
Tap the " + " icon at the top right corner.
(for / )
ENGLISH
21