Kenwood KDC-BT665U Mode D'emploi page 33

Audio Settings
[DTA SETTINGS]
[POSITION] Selects your listening position (reference point).
[ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ;
[FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seats
• [FRONT ALL] is displayed only when [2-WAY X'OVER] is selected.
(Page 6)
[DISTANCE] [0CM] to [610CM]: Fine adjust the distance to compensate.
(Before making an adjustment, select the speaker you want to adjust.)
[GAIN] [–8DB] to [0DB]: Fine adjust the output volume of the selected
speaker.
(Before making an adjustment, select the speaker you want to adjust.)
[DTA RESET] [YES]: Resets the settings ([DISTANCE] and [GAIN]) of the selected
[POSITION] to default. ; [NO]: Cancels.
[CAR SETTINGS] Identify your car type and rear speaker location in order to make the
adjustment for [DTA SETTINGS].
[CAR TYPE] [COMPACT]/[FULL SIZE CAR]/[WAGON]/[MINIVAN]/[SUV]/
[MINIVAN(LONG)]: Selects the type of vehicle. ;
[OFF]: Not compensating.
[R-SP LOCATION] Selects the location of the rear speakers in your vehicle to calculate the
furthest distance from the listening position selected (reference point).
• [DOOR]/[REAR DECK]: Selectable only when [CAR TYPE] is selected
as [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].
• [2ND ROW]/[3RD ROW]: Selectable only when [CAR TYPE] is
selected as [MINIVAN] or [MINIVAN(LONG)].
• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS],
select the speaker you want to adjust:
When 2-way crossover is selected:
[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]
– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting
other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
(Page 23)
– [SUBWOOFER] is selectable only when [SWITCH PREOUT] is set to [SUB-W]
(page 5) and [SUBWOOFER SET] is set to [ON]. (Page 22)
When 3-way crossover is selected:
[TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER]
– You can only select [WOOFER] if a setting other than [NONE] is selected for
[WOOFER] of [SPEAKER SIZE]. (Page 24)
• [R-SP LOCATION] of [CAR SETTINGS] is selectable only if:
– 2-way crossover is selected. (Page 6)
– A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].
(Page 23)
Determining the delay time automatically
If you specify the distance from the currently set
listening position to every speaker, the delay time will
be automatically calculated.
1 Set [POSITION] and determine the listening
position as the reference point (the reference point
for [FRONT ALL] will be the center between the
right and left in the front seats).
2 Measure the distances from the reference point to
the speakers.
3 Calculate the distance between the furthest speaker
(subwoofer on the illustration) and other speakers.
4 Sets the [DISTANCE] calculated in step 3 for
individual speakers.
5 Adjusts [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position.
ENGLISH
25