Maintenance - SPORTSTECH DeskFit200 Manuel

!
Caution:
Cleaning:
Remove dust regularly to keep the parts clean and for sustained durability. Be sure to wear clean
athletic shoes to avoid dirt getting into the treadmill. Treadmills are cleaned with a damp cloth, and
with a little soap. Be careful not to moisten the electrical components and the running surface.
Caution:
Make sure the power plug is pulled out before removing the motor cover, clean the interior of the
device at least once a month, and ensure that the electrical components do not get wet.
The footboard and running belt of the electric tread was lubricated in the factory. The friction between
the running belt and the footboard has significant impact on the product life and the performance of
the electric tread, so a regular application of grease is required.
Apply silicone oil:
Place the treadmill on the side, tilt it by 45°, then lift the running surface. Allow a small amount of oil
to flow into the centre of the footboard, as shown in the following illustrations.
Note: Please use the oil ecologically.

10. MAINTENANCE

Prior to maintenance, make sure that the power plug of the treadmill
is pulled out.
42