Installation Of The Accessories (Optional) - SPORTSTECH DeskFit200 Manuel

Starting function: In standby mode, press the START / STOP button to start the treadmill.
Stop function: Press the START / STOP button for approx. 3 seconds to stop the treadmill directly.
Pause function: Briefly press the START / STOP button once to pause the treadmill. The device
continues to record the data.
Quick stop function: Press START / STOP 3 times or more to stop the treadmill instantly.
Troubleshooting:
1. To test if the remote is connected to the treadmill, press the "SPEED +" or "SPEED" button once.
A sound will be played now. If only one sound is heard, there is a stable connection. If a sound is
played twice, the connection is faulty. If no sound is heard at all, reconnect the remote to the device
as described above.
2. If the remote control is successfully connected but not working, disconnect the treadmill from the
power supply. Then repeat the connection process.
3. If you press a button on the remote control and the treadmill does not move despite the LED
flashing, change the batteries in the remote control.

7. INSTALLATION OF THE ACCESSORIES (OPTIONAL)

The handle is not included and can be bought additionally.
To install the handle, follow these 3 steps
Step 1.
Remove the 4 screws on the front
of the device using the 5 mm hex
wrench.
36