Using The Radio- Fm Mode; Fm Display Modes - auna US-10033125 Fiche Technique

EN
18

USING THE RADIO- FM MODE

1. Turn the radio on, press Mode/Power button repeatedly and select the
FM mode. The display will show 'FM' and the radio will automatically
tune to the nearest station and then display will show the station name,
or frequency if RDS not available.
2. To search manually, press the Previous or Next buttons  , each press
will increment the frequency by 0.05 MHz
3. To achieve auto search, press and hold Previous or Next buttons 
 or press scan button, and the radio starts to scan down or up the
frequency band, the display will show "Scanning...", and it will stop
automatically once station has been found.

FM DISPLAY MODES

This function allows information relating to the current station to be shown
in the display, press the Info/Menu button repeatedly to scroll through the
following:
• RDS (scrolling text): The broadcaster may include a scrolling message
about the current program.
• Program type: This describes the style of the program being broadcast.
• Station name: such as BBC RD
• Audio Mode: the display will show if the station being received is stereo
or mono
• Time/date: the time and date will be automatically updated by the radio
time signal (if RDS is available).
FM mode- Audio setting
• Press Previous or Next button   to choose 'Forced mono' or 'Stereo
allowed'
• If signal is weak, please choose Forced mono to get better sound
quality.
FM mode-System
Sleep: Use knob to rotate to choose Sleep off-15 minutes-30 minutes-45
•
mintues-60 minutes-90 minutes
• Equalizer: Use knob to rotate to choose My EQ-Normal-Classic-Jazz-
Pop-Rock-Speech
• Time-Use knob to rotate to choose Set Time/Date-Auto update-Set
12/24 hour-Set date format.