Fm Radio Operation - auna Stereo Sonic DAB+ Mode D'emploi

Prune
This function removes inactive stations.
1. Press MENU button to access the menu control.
2. Press the PREVIOUS or NEXT button until "Prune" is displayed and then
press the ENTER button.
3. Press the PREVIOUS or NEXT button to select "<Yes>" and then press the
ENTER button to prune the unit.
4. Press the MENU button to exit the menu control.

FM RADIO OPERATION

Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the
available stations (max. 20 storage).
Manual Scan
1. Press the TUNE or TUNE button repeatedly to tune to a different
frequency.
2. Alternatively press and hold the TUNE or TUNE button to automatically
search to the next available station.
Storing FM Presets
You can save up to 20 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the MEM/PROG button. Flashing preset channel number
is displayed.
3. Press the Preset - or Preset + button to a preset number that you want to
store. Then press the ENTER button to save. A confirmation message is
displayed.
Recall Stored FM Presets
Press the Preset- or Preset+button directly tune to the preset channel.
Or press the [MEMORY] button once. Then press the Preset- or Preset+
button to a preset number that you want to recall and press the ENTER
button to confirm.
To directly recall the preset channel by using the numeric buttons, press the
numeric buttons [1], [2], ..., [0].
For example when the button [3] is pressed and then follow by pressing the
ENTER button, it will tune to preset channel 3. Or when the button [1] and
then button [2] are pressed and then follow by pressing the ENTER button,
it will tune to preset channel 12.
EN
47