EdilKamin SERBATOIO 250 Installation, Usage Et Maintenance page 12

MOUNTING THE COMPONENTS
Fastening the electronic regulator (I) to the tank
The electronic regulator (I) is delivered already wired in its box which then must be installed in the special hous-
ing on the front of the tank and then fix the earthing cable (P) (Pics. 11-12).
If installation is difficult, you can remove the lid by loosening the 4 screws.
Bring the power cable to the motor and secure it:
- to the side of the tank with the adhesive plate and clamp (Pic. 13)
- to the feeder tube support (D) using the cable ties (photo 14)
Insert the plug into the motor outlet (pic. 15)
Attention: prevent the casing (M) - (pic. 16) from coming into contact with the gear motor blades
Pic. 11
Pic. 13
Pic. 15
I
12
Pic. 12
D
Pic. 14
Pic. 16
P
M