Garland 200 FW Manuel D'instructions page 22

English
2.5. USE AND CARE OF THE MACHINE
Use this machine and its accessories according to
the instructions provided and taking into account
working conditions and work to be done. The use of
this machine for jobs different to those stipulated can
cause danger.
The manufacturer will not be responsible for damages
provoked through an inadequate use of the machine.
Check that all security elements are installed and in
good working condition.
Remember that it is the end user operating the
machine who is responsible for any danger or
damages caused to other people or things. The
manufacturer will not in any case be held liable for
damages caused by an incorrect use of this machine.
Do not force the machine over its capacity. Use the
machine for the correct job. The use of the machine
for its proper job, will ensure that you work better and
more safely.
Keep the machine with a good maintenance. Ensure
all moving parts are aligned and that no other parts
are damaged or broken. If the machine is damaged,
repair before use. Many breakages occur because
machines are poorly maintained.
Maintain the handles of these machines dry and
clean. Oily or greasy handles are slippery and will
cause loss of control of the machine.
If the machine starts vibrating in a strange way, stop it
and examine it to find out the cause.
f the motive is not clear, take the machine to your
nearest service agent. Vibrations are always an
indicator that the machine has a problem.
Reduce the throttle setting during engine shut down
and, if the engine is provided with a shut-off fuel
valve, turn the fuel off when engine is stopped.
Stop the engine whenever you leave the machine.
2.6. SERVICE
Periodically take your machine for revision by a
qualified after sales service and use only original
spare parts. This will guarantee that the machine is
always in good working condition.
2.7. RESIDUAL RISK FACTORS
Even when the tool is used as prescribed it is not
possible to eliminate all residual risk factors. The
following hazards may arise in connection with the
tool's construction and design:
• Health defects resulting from vibration emission if
the power tool is being used over longer period
of time or not adequately managed and properly
maintained.
WARNING! This machine produces an electromagnetic
field during operation. This field may under some
circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to
consult their physician and the medical implant
manufacturer before operating this machine.
22/96