Napoleon PRO285 Mode D'emploi page 55

14
WARNING!
!
burner after cleaning it is very important
EN
that the valve/orifice enters the burner
tube before lighting your gas grill. If the
valve is not inside the burner tube a fire
or explosion could occur.
CAUTION!
!
exist, do not use the gas grill. Have the part replaced by your Napoleon Grill dealer or qualified gas
installer.
Cast Aluminum Lid: Your grill is equipped with a cast aluminum lid which will not rust and can easily be
refinished. The inside of the lid is raw aluminum, flow marks and releasing agent marks may be present,
this is not a defect but marks from the mold which is used in the manufacturing process. Clean the
lid periodically with warm soapy water. Although cast aluminum will not rust, high temperatures and
weathering can cause oxidation to occur on aluminum surfaces. This appears as white spots on the
casting. To refinish these areas, clean first and sand lightly with fine sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from
over-spray. Follow the manufacture's directions for curing.
www.napoleon.com
When reinstalling the
Check for abrasions, melting, cuts, and cracks in the hose. If any of these conditions
N415-0309CE-GB-DE DEC 29.20