Cleaning - Parkside PDM 300 C3 Mode D'emploi Et Consignes De Sécurité

PARKSIDE PDM 300 C3
• Replace the spent F1 (F 250 mA / 300V) or F2 (F 10 A / 300 V) fuse with
a new one of the same type.
• Replace the back panel and retighten the four screws you undid before.
Then, secure the battery compartment cover again using the screw.

8.3 Cleaning

WARNING! Switch the multimeter off and remove all measurement
cables before cleaning it!
To clean use a dry cloth. Never use any solvents or cleaners that may damage
the plastic materials. Make sure that no liquid gets into the housing. For more
stubborn dirt, use a slightly damp cloth.
20 - English