Intended Use; Package Contents - Parkside PDM 300 C3 Mode D'emploi Et Consignes De Sécurité

Congratulations!
By purchasing the PARKSIDE PDM 300 C3 Digital Multimeter hereinafter
referred to as the multimeter, you have opted for a quality product.
Before first using it, familiarise yourself with the way the multimeter works and
read these operating instructions through carefully. Be careful to follow the safety
instructions and only use the multimeter as described in the operating instructions
and for the applications given.
Keep these operating instructions in a safe place. If you pass the multimeter on to
someone else, make sure to give them all the relevant documents with it.

1. Intended use

The multimeter allows you to measure DC/AC voltages and direct and
alternating currents. The multimeter also has functions for resistance measurement
and diode testing, a function generator and a continuity check function. This
multimeter has not been designed for corporate or commercial use. Use the
multimeter for private purposes only. Any use other than that mentioned above
does not correspond to the intended use. This multimeter fulfils all relevant norms
and standards associated with CE Conformity. In the event of any modification to
the multimeter that was not approved by the manufacturer, compliance with these
standards is no longer guaranteed. The manufacturer shall not be liable for any
damage or malfunctions resulting from such modifications.
Observe the regulations and laws in the country of use.

2. Package contents

• Multimeter
• 2 measuring probes (inc. cables)
• 9 V block battery
• 1 screwdriver
• These operating instructions
PARKSIDE PDM 300 C3
English - 3