Replacing The Fuse - Parkside PDM 300 C3 Mode D'emploi Et Consignes De Sécurité

8.2 Replacing the fuse

Proceed as follows: to replace the fuse:
WARNING! Switch the multimeter off and remove all measurement
cables before opening it!
• Use the screwdriver provided to undo the top screw on the back of the
multimeter and remove the battery compartment cover by pulling it upwards.
• Undo the four screws on the back of the multimeter and remove the back
panel.
PARKSIDE PDM 300 C3
English - 19