Publicité
Les langues disponibles
Les langues disponibles
Step 4:
Secure the Pedals (27L/R) to the Pe-
dal Support Tube (18L/R) respectively
using Hex Bolt (28), Flat Washer (29)
and Nylon Nut (30), viewed from the
rider's travel direction.
Note: Both pedals are labeled l for left
and r for right. to tighten turn the left
pedal counterclockwise and the right
pedal clockwise.
Step 5:
a: Fit the Armrest (31) to the
Handlebar Post (9), secure in place
with the Spring Washers (34) and
Allen Bolts (35) which are pre-
attached to the Handlebar Post
(9), and then pull the Pulse Sen-
sor Wire (46) out of the Handlebar
Post (9), finally clip the Handlebar
Clamp Cover (36).
b: Fix the Handlebar (32L/R) to
the Swing Bar (24L/R) with Carria-
ge Bolt (37), Arc Washer (14) and
Acorn Nut (33) respectively.
Note: Foam Grip may be easy bro-
ken, using it carefully!
15
Publicité
