Klarfit 10006712 Mode D'emploi page 14

Step 3:
a: Attach Swing Bar (24L/R) to Pedal support Tube (13L/R) using Hex Bolt (21), Flat Washer
(22) and Nylon Nut (23).
b: Fix the Swing Bar (24L/R) to the long axle of the Handlebar Post (9) with Hex Bolt (25)
and Flat Washer (26), and then fix to Pedal Support Tube (18L/R) on the Crank (49) with
Locking Bolt (19L/R), wave washer (56), Spring Washer (39) and Nylon Nut (40L/R). Then
cover the Nut Cap (20a), (20b), (41).
Note: Ensure that all bolts and washers are in place an partially threaded in before comple-
tely tightening the bolt.
14