Télécharger Imprimer la page

Faber HOO-B Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
4. CONTROLS
Button Function
A
Turns the motor on/off at Speed One.
B
Decreases the motor Speed in 4 steps: b - 3 - 2 - 1
b= Intensive speed timed to run for 6 minutes.
When the filters alarm is triggered, the alarm can be reset by pressing
and holding this button for approximately 3 seconds. These indications
are only visible when the motor is turned off.
C
Increases the motor Speed in 4 steps: 1 - 2 - 3 - b
b= Intensive speed timed to run for 6 minutes.
Press and hold for approximately 2 seconds to Enable/Disable the
Activated Charcoal Filter alarm. These indications are only visible when
the motor is turned off.
D
Delay function
Activates / Deactivates the Delay Function, switching the motor off after
15 minutes. This function cannot be activated while at Intensive Speed.
It can also be deactivated by pressing the Motor OFF button.
E
This symbol lights up after 100 hours in operation, indicating the Grease
Filters saturated alarm.
F
This symbol lights up after 200 hours in operation, indicating the Activated
Charcoal Filters saturated alarm.
G
This symbol lights up when the Delay function is enabled
Warning: Remove the glass cover before starting
to use the appliance.
6
a
b
c
Display
Displays 1
Displays 1, 2, 3, or b
Displays 8 three times
Displays 1, 2, 3, or b
Displays C twice = Enabled
Displays C once = Disabled
Displays the symbol
On/Off.
On/Off.
On/Off.

Publicité

loading