Chauvet DJ MegaStrobe FX12 Guide De Référence Rapide page 4

MegaStrobe™ FX12 QRG
Mounting
Product
Mounting
Diagram
Control Panel
Description
Menu Options
Main Level
Starting Address
DMX Personality
Auto Program
Brightness and Strobe
Speed
Automatic Mode
Sound-Active Mode
and Sensitivity
Slave Mode
Temperature
Inverse Display
Factory Reset
DMX Linking
Starting
Address
Master/Slave
Connection
Before mounting this product, read the Safety Notes.
Bracket Adjustment Knob
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value
Programming Levels
d___
_CH
C000 C000-C255
AUTO
SU- SU-0-SU-8
SLAV
tENP
diS
LoAd
The MegaStrobe™ FX12 can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 505.
The MegaStrobe™ FX12 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
d001–d512 Selects the starting address
2CH
5CH
Selects DMX personality
8CH
Sets auto program brightness and
FS-0-FS-9
strobe speed
Sets auto program
Sets sound active mode and
S-00-S-99
sensitivity
Sets Slave mode
Temperature display
diS
Change the LCD display text position
rdiS
Loads factory default settings
4
Mounting Bracket
Description
EN