Publicité
Les langues disponibles
Les langues disponibles
Display Modes
Press the INFO button repeatedly to make the display cycle through the following display modes:
Radio Text
Programme Type
Frequency
Audio Type
Power Status
Time/Date
Storing and Recalling Preset Stations (FM / DAB)
This function allows up to 10 stations to be programmed into the memory and stored in both DAB and FM
mode.
•
To store a preset, first tune to your desired station, then press and hold the PRESET button for longer
than 2 seconds. The display will show: "Preset Store <#:(Empty)>".
•
Rotate the SEARCH control to select your desired station preset number. Press SELECT to confirm and
save.
•
To listen to previously saved stations, press PRESET and then scroll though the list with SEARCH. Press
SELECT to tune in.
Please note: Alarm functions will work only when the device runs on mains power. Attempting to enter
Standby mode when powered by battery will turn the product off.
An active alarm is indicated by its icon in the top line of the display Alarms can be switched on or off in
standby mode. However, the alarm parameters can only be set when the product is on. To set or change
alarm 1, press ALARM/SNOOZE button once, then press the SELECT button.
This displays the information about the current programme.
This describes the "style" or "genre" of the programme that is being broadcast.
This displays the frequency of the present station, such as "87.8MHz".
This displays if the station being received is in mono or stereo.
Display the power supply is adaptor or battery. If the power supply is battery,
the display will show the battery capacity (21-100). When the battery is less than
20, the display will show battery is low.
This display the current time and date provided automatically by the broadcas-
ter.
Alarm and Sleep
19
Publicité
