Publicité
Les langues disponibles
Les langues disponibles
The display
In standby mode the date and time is indicated on the display, as well as the number of
new phone numbers and the total number of phone numbers that have been stored in the
Caller ID memory.
Making a call
Regular dialling
1. Pick up the handset.
2. Enter the desired number.
Dialling with correction function
If necessary, the telephone number you have dialled can be changed before it is connected.
1. Enter the required number. Mistakes can be deleted using 0 .
2. Pick up the handset, the number is dialled.
Pick up the handset, the number is dialled.
Call Back
Pick up the handset. Press r to redial the most recently dialled number.
Mute button
Press and hold
to disable the handset microphone, release
z
Volume control
The handset volume may be adjusted during a call with
Ring signal
Ring volume
e
Ring melody
Ringer tone (915c)
n
Memory
The telephone has 4 one-touch memories and 10 speed dial numbers. When a number has
been saved in these, you only need to press one or two buttons to make a call. The one-
touch numbers are M1-M4 and the speed dial numbers are 0-9.
Saving memories
1. Press
.
2. Enter the phone number (up to 22 digits) using the keypad. Press
3. Enter name. Press the equivalent digit key once or several times for the first letter.
Press
.
4. Select M1-M4 by pressing the corresponding button or select a memory location by
pressing one of the keypad numbers
Dialling using one-touch memories
1. Pick up the handset and select M1-M4 by pressing the corresponding button.
Dialling with speed dial numbers
1. Lift up the handset and press
2. Select the speed dial number by pressing
English
z
-
.
0
9
.
-
.
0
9
to reconnect the microphone.
.
.
Publicité
