Electrical Connection - U.s.a. Only - Jenn-Air 30" Instructions D'installation

30" (76.2 cm) and 36" (91.4 cm) Models
1. Disconnect power.
2. Remove the terminal block cover screws and disengage
mounting tabs to remove terminal block cover from back
of range.
A
A. Phillips head screws
B. Terminal block cover
C. 2 mounting tabs at bottom
3. Add power supply cord strain relief.
Assemble a UL Listed strain relief in the opening.
■
A. UL Listed strain relief
Electrical Connection — U.S.A. Only
B
C
A
48" (121.9 cm) Models
Tighten strain-relief screw against the power supply cord.
■
4. Complete installation following instructions for your type
of electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
Electrical Connection Options
If your home has: And you will be
connecting to:
4-wire receptacle A UL Listed,
(NEMA type 14-50R) 250-volt
minimum, 40-
or 50-amp,
range power
supply cord
3-wire receptacle A UL Listed,
(NEMA type 10-50R) 250-volt
minimum, 40-
or 50-amp,
range power
supply cord
Go to section:
4-wire connection:
Power supply cord
3-wire connection:
Power supply cord
13