MBO Merkura 1050 Mode D'emploi page 42

Merkura 1050 GB neu
18
USING THE PULSE COMPUTER
Stored values
Z
O
N
E
C
Backlight
D
www.MBOservice.net
27.03.2003
All manuals and user guides at all-guides.com
Maximum and minimum heart rate and
average % of MHR.
In pulse mode, keep pressing key "B" until MEM
appears in the display.
Press key "C" to show the following stored
values in the bottom line of the display:
- HI = maximum heart rate
- LO = minimum heart rate
- AP = average % of MHR
B
(% of maximum heart rate)
Note:
To delete the stored value for maximum pulse
rate, press and hold down key "C" when the
stored value is displayed.
Press key "D" to switch on the backlight.
The backlight automatically goes off again after
approx. 2 seconds.
8:31 Uhr Seite 18