Hilti SB 4-A22 Mode D'emploi Original page 11

Electrical safety
▶ Before beginning the work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may become live, presenting a risk of electric shock, if the blade
inadvertently cuts into a live electric cable.
▶ Hold the power tool by the insulated gripping surfaces when performing work in which the accessory
tool might come into contact with concealed wiring. If the accessory tool comes into contact with a live
wire, metal parts of the power tool can also become live, presenting a risk of electric shock.
Careful handling and use of electric tools
▶ Always use only saw blades of the specified dimensions and with an arbor hole of the correct size.
▶ Do not use dull/blunt or damaged blades. These cause increased friction and present a high risk of the
saw blade binding or kicking back.
▶ Never use damaged or incorrect blade washers or bolts.
▶ Observe the manufacturer's instructions regarding the handling and storage of saw blades.
2.3 Safety instructions for bandsaws
▶ Hold the power tool by the insulated gripping surfaces, when performing an operation where the
cutting accessory may contact contact hidden wiring Cutting accessories contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
2.4 Battery use and care
▶ Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
*2145465*
2145465 English 5