Hilti SB 4-A22 Mode D'emploi Original page 12

3 Description
3.1 Product overview
3.2 Product overview
Saw blade guard
|
Saw blade guard fastening screw
¡
3.3 Intended use
The product described is a cordless bandsaw. It is designed for cutting metals and plastics.
The product is designed for two-handed operation.
• Use only Hilti lithium­ion batteries of the B 22 series with this product.
Use only Hilti-approved battery chargers to charge these batteries. More information is available from
•
your Hilti Store or from www.hilti.group
3.4 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes containing liquids.
▶ Do not saw into unknown materials.
3.5 Li­ion battery status indicator
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the indicator of
the Li­ion battery. Press either of the battery release buttons to check the charge state of the Li­Ion battery.
Status
4 LEDs light up.
3 LEDs light up.
6 English
1
2
Battery
@
Control switch safety lock (switch-on inter-
;
lock)
Control switch
=
Grip (insulated gripping surface)
%
Guide
&
Bandsaw blade
(
Direction-of-rotation arrow on casing
)
Lever for tensioning bandsaw blade
+
Side handle (insulated gripping surface)
§
Battery release button
/
Battery state of charge indicator
:
Roller for bandsaw blade
∙
Blade guide
$
Rubber ring
£
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
2145465
*2145465*