Assembly - Baby Trend Snap-N-Go Ride Along Elite Manuel D'instruction

ASSEMBLY

IMPORTANT!
stroller, please follow these instructions carefully. Please
keep these instructions for future reference.
IMPORTANT!
inspect this product for damaged hardware, loose joints,
missing parts or sharp edges. NEVER use if any parts are
missing or broken.
IMPORTANT!
Remove stroller from box. The front and rear
wheels MUST be installed prior to use.
FRONT WHEELS
To attach the front wheels, unfold stroller as
described in the following section:
1) • Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
• Lean the stroller backwards and push
each front wheel assembly into the front
wheel housing until they lock into place
(Fig. 1c).
NOTE: Pull on the wheel assembly to
ensure that it is securely attached to the
stroller.
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
To ensure safe operation of your
Before assembly and each use,
Adult assembly is required.
• Remove Front Wheels: Push release
button on the side of the wheel hub and
pull wheel assembly from hub (Fig. 1d).
REAR WHEELS
2) • Lean the stroller forward and press the
rear wheel post into the rear frame hub
until it clicks into place (Fig. 2a).
NOTE: Pull on the rear wheel to ensure
that it is securely attached to the stroller.
Fig. 1a
• Remove Rear Wheels: Push tab outward
and pull wheel from hub (Fig. 2b).
BASKET
Fig. 1b
3) • Snap the buttons of the basket flap over
the Basket Tube (Fig. 3).
Fig. 1c
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Release Buttons
Fig. 1d
Fig. 2a
Fig. 2b
6
Fig. 3