Assembly - Baby Trend Expedition EX Jogger Manuel D'instructions

ASSEMBLY

PARENT TRAY
WARNING:
place hot liquids or more
than 3 pounds in the parent
tray. Serious burns or
unstable conditions could
result.
• Align the fittings on the ends of the
7)
parent tray with the fittings on the
outsides of the handle. Pull outward on
the opposite end while pushing down
on the tray until locked onto the stroller
handle. Please be careful not to pinch
your fingers when installing the parent
tray (Fig. 7).
CANOPY
• To open the canopy: push forward on
8)
the front edge of the canopy while holding
the rear of canopy in place (Fig. 8).
• To fold the canopy: pull backwards on
the front edge (Fig. 8).
SEATBACK POSITIONING
• To recline the seat: loosen the strap
9)
through the buckle and adjust to the
required recline position (Fig. 9a). To
place the seat back in a more upright
position, press upward on the seat back
with one hand while pulling the strap
through the buckle with the other (Fig. 9b).
7
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Do not
Fig. 7
Fig. 8
Fig. 9a
Fig. 9b
NOTE: The upright position should be
used only for a child that is at least 6
months old. Always re-adjust the safety
harness, including the shoulder belts,
when repositioning the seatback.
CHILD TRAY
WARNING:
Do not
place hot liquids or more than
3 pounds in the child tray.
Serious burns or unstable
conditions could result.
10)• To attach the child tray: Push the
angled tray onto the post at the end of
the right armrest, until locked into place
(Fig. 10a).
• Rotate the tray downward until latched
onto the left armrest (Fig. 10b).
NOTE: Check that the release button
comes through and securely latches
the tray in place.
• To access the child seat: Press inward
on left side tray release button and rotate
upward on the tray (Fig. 10c).
• To remove the child tray: Press the
release button and rotate the tray 180
degrees and pull the tray until it is
released (Fig. 10d).
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 10a
Fig. 10b
Fig. 10c
Fig. 10d
8